Add To Favourites   

Back

Basket Forward

       Home

       Online Store

       Special Offers

       About Us

       Ordering

       Delivery

       Contact Us

       Links

       Site Map

Register for
Product Updates

Name
Email
 

 

Series 2000 Synthetic Racing Grease
    Product  Code: GRG

Series 2000 Synthetic Racing Grease

"Unbeatable high-speed/high temperature performance"

Ultimate protection for hard-driven, high-performance vehicles. Dramatically reduces friction and wear for improved performance. Excels at both high and low temperature performance. Outperforms other conventional and synthetic greases.

"Before using AMSOIL, two of our race cars were suffering wheel bearing seizure on a regular basis. This year, using AMSOIL Racing Grease, our problems stopped totally."

H.C., Houston, TX

Applications

AMSOIL Series 2000 Synthetic Lithium Complex Racing Grease meets the highest performance standards of the National Lubricating Grease Institute, GC for wheel bearing applications and LB for chassis applications.

Load Capacity

AMSOIL Series 2000 Racing Grease is an extreme-pressure multi-purpose grease formulated for high-temperature/high-speed applications. Yet, it excels in the protection of low-speed bearings, a job usually reserved for heavy-duty products. Components get the load bearing capacity of a heavy-duty grease without sacrificing the high-temperature protection of a multi-purpose.

Anti-Wear Performance

AMSOIL Series 2000 Racing Grease passes the Ford Film Strength Endurance Test with a 16 point margin (see graph). Most nonsolid-fortified racing greases, synthetic or conventional, do not pass. AMSOIL Series 2000 Racing Grease keeps greased components in like-new condition.

All-Temperature Protection

AMSOIL Series 2000 Racing Grease pairs a high Viscosity Index synthetic base oil with a top-quality lithium complex thickener, known for its extraordinary performance in temperature extremes. AMSOIL Series 2000 Racing Grease offers excellent low-temperature pumpability and high-temperature consistency for dependable all-temperature protection.

Oxidation Resistance and Inhibition

AMSOIL Series 2000 Racing Grease’s excellent oxidation resistance and robust package of oxidation inhibitors prevent grease breakdown and component surface damage in the highly oxidizing conditions associated with high temperature operations.

Friction Reduction

AMSOIL Series 2000 Racing Grease maximizes power through-put and fuel efficiency by minimizing friction. The extra power given by Series 2000 improves acceleration and top-end speed.

Washout Resistance and Corrosion Inhibition

AMSOIL Series 2000 Racing Grease resists water wash out and inhibits rust and other forms of corrosion.

Typical Technical Properties
AMSOIL Synthetic Lithium Complex Racing Grease NLGI
GC-LB
Series 2000 Racing Grease
Thickener NR* Lithium Complex
NLGI Consistency Grade NR* 2 EP
NLGI Performance Grade NR* GC-LB
Penetration (ASTM D-217) 25° C [77° F], 0.1 mm Worked 60 strokes 220 - 340 265 - 295
Dropping Point (ASTM D-566) °C [77° F] 220 [428] 285 [545]
Water Washout (ASTM D-1264) 79° C [175° F] % loss 15 max 5.1
Oil Separation (ASTM D-1742) 24 hr. @ 25° C [77° F], % loss 10 max 2.8
Rust Protection (ASTM D-1743) pass pass
Timken OK Load Test (ASTM D-2509), lbs. NR* 60
Fortified with Moly Compound NR* no
Four Ball Wear Test (ASTM D-2266) Wear Scar Diameter, mm 0.9 max 0.32
Compatibility with other greases NR* excellent
Extreme Pressure, Four Ball Method (ASTM D-2596) Weld Point, kgf 200 min 400
Extreme Pressure, Four Ball Method (ASTM D-2596) Load Wear Index, kgf 30 min 65
High Temperature Life (ASTM D-3527) hours 80 min 300
Fretting Wear (ASTM D-4170)* mg 10 max 3.4
Elastomer Compatibility (ASTM D-4289) Volume Change, %, GC -5 to +30 21.6
Elastomer Compatibility (ASTM D-4289) Volume Change, %, LB 0 to +30 9.88
Elastomer Compatibility (ASTM D-4289) Hardness Change, durometer-A points, GC +2 to -15 -3
Elastomer Compatibility (ASTM D-4289) Hardness Change, durometer-A points, LB 0 to -10 -6
Leakage (ASTM D-4290), G* 10 max 6.0
Low Temperature Torque (ASTM D-4693) n·m, max @ -40° C [-40° F] 15.5 2.3
Water Spray Off (ASTM D-4049), % max NR* 22.7
* NR: Not Required for NLGI GC or LB labeling

Home Online Store back to: Lithium Based Greases


This site uses 128-bit secure encryption to create a safe online shopping environment.
Trading terms | Security Copyright © 2004 Performance Oils Ltd  Site design by Greenlynx Ltd